Network configuration
=====================
Copy BOOT.BIN and image.ub on the SD card

Using Pyrame with bindPyrame
----------------------------

.. figure:: network.png
    :figwidth: 70 %
    :align: center

    Network configuration using Windows or Mac hosts.


Direct connection (No Pyrame)
-----------------------------

If you intend to use a simple setup like a ZBoard/MATIS/PEPITA directly connected to a computer.

From your computer:

- Set ip: 192.168.0.1 and mask: 255.255.255.0
- Connect Filezilla to 192.68.0.10 (login/pass: root) and copy MATIS_project.elf to home/root
- Start putty then : ``chmod +x MATIS_project.elf``
- then ``.\MATIS_project.elf``