Network configuration

Copy BOOT.BIN and image.ub on the SD card

Using Pyrame with bindPyrame

_images/network.png

Network configuration using Windows or Mac hosts.

Direct connection (No Pyrame)

If you intend to use a simple setup like a ZBoard/MATIS/PEPITA directly connected to a computer.

From your computer:

  • Set ip: 192.168.0.1 and mask: 255.255.255.0

  • Connect Filezilla to 192.68.0.10 (login/pass: root) and copy MATIS_project.elf to home/root

  • Start putty then : chmod +x MATIS_project.elf

  • then .\MATIS_project.elf